External trackpad for mac11/30/2022 ![]() ![]() There are three connections in this chain: If both stopped working at the same time (like in my case), you’ll have to take a closer look at the cables and connectors in the red-green-yellow chain.If the trackpad acting weird (the pointer moves on its own, moves erratically, clicks by itself) but the keyboard still works, most likely it’s just a bad trackpad and replacing it with a new one will fix the issue.If the trackpad still works, but the keyboard doesn’t, it’s either bad keyboard which has to be replaced or there is a failure in the chain somewhere between the red arrow and green arrow.A signal from the keyboard travels into the trackpad (red arrow), after that it travels through the trackpad circuit board (green arrow) and eventually goes into the logic board though the trackpad cable (yellow arrow). In a Macbook Air the keyboard is not connected directly into the logic board. In order to troubleshoot a problem like that you have to understand how the signal goes from the keyboard and trackpad into the logic board. I didn’t find any water damage on the logic board. Pay attention during the reassembly process. ![]() For removing the battery you will need a T5 Torx screwdriver.Īgain, three screws I marked with green circles are longer than two other screws. Two screws I marked with green circles are longer than other eight screws.Īfter removing the bottom cover I disconnected and removed the battery to take a closer look at the trackpad area. For removing the bottom cover you will need a special P5 Pentalobe screwdriver. First of all, I removed the bottom cover to do visual inspection of the internal laptop components. ![]()
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |